What You Should Expect During Whole-Home Water Treatment Filter Installation

With the possibility of so many different types of contaminants making their way into your home's water supply, it is no secret that installing a whole-house water filter is a good idea. As excited as you may be to finally get clean and pure water throughout the house for your family, you are likely wondering what the installation process is going to involve. Here are a few questions and answers about what to expect, how to prepare, what you have to look forward to when the job is complete.

Will the water be shut off during installation?

Yes. during water treatment system installation, the main water valve to your home will have to be shut off. This will allow the contractor to prevent water flow while making the necessary adjustments and fitting the existing plumbing to the new system.

Will you have to be home while the contractor is installing the water treatment system?

It is a good idea to be at home during installation just  to you can ask the contractor any questions you have. Further, the contractor will have to come inside of your home to test the water once installation is complete, so you should be there to let him in.

Is there anything that should be done in order to prepare for the installation process?

The filtration system installation will involve getting into points-of-entry where water is coming into your home from the main lines. Therefore, the only thing you really need to do is make sure you have the area cleared of belongings so it is easy to access. You should also keep any pets either in a pen or on a leash during installation just to make the job easier on the contractor.

How soon after installation will the water be ready to consume?

The contractor will run a few gallons of water through each faucet in your home to eliminate any remaining untreated water that may be situated in your pipes. Once that process is complete, you can start enjoying your new clean water system right away.

Will the installation contractor show you general maintenance tips?

Once installation is complete, the contractor will usually show you a few general maintenance tips, such as how to change filters or adjust output. You should also receive a owner's manual for your newly installed water treatment system that offers useful information and troubleshooting advice.

Once you have your water treatment system in place, you can rest assured that your water will be safe throughout the home. Crisp, clean drinking water that is free of contaminants will not only be safe, but [will] taste fresh and satisfying for you and your family. For more information, contact a company like Valley Pump Inc.


Share